PCN T 2-502

Here’s how you can get started with the room

• Step 1: Power On the Room

  Step 1: Power on the Room

  Go the touch panel and click the Power button. This will power on the displays on the wall, and the displays in the ceiling at the center of the room.
  

• Step 2: Choose a Source

  Step 2: Choose a Source

  After you’ve logged into the computer, decide what you want to share with the class. By default the room should have powered onto the PC source, so you should be seeing both the left and right side of the PC desktop.

  

  If you want to change what’s being displayed, do the following:

  Choose a Display

  Select either Display 1 or Display 2 on the Touch Panel.

  

  

  Choose a Source

  The source you select will be shared on the display you choose.

  

  

  The sources available are:

  

  Computer Desktop 1
  The left side of your computer desktop

  

  Computer Desktop 2
  The right side of your computer desktop

  

  HDMI
  What you would select if you brought your own device and connected it via HDMI

  

  Document Camera
  Make sure it’s powered on first

  NOTE: To mirror the content, simply go to each display and choose the same source. For example, go to Display 1 and select Doc Cam, then go to Display 2 and select Doc Cam. Both displays will show the Doc Cam source!

The Smart Podium is an interactive monitor that let’s you touch and annotate.